5?填充柱 電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法
產品名稱:5?填充柱 電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法
產品型號:5?填充柱
產品廠商:浩瀚色譜(山東)應用技術開發有限公司
簡單介紹
電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法,液化石油氣,二甲醚,甲縮醛,乙縮醛,乙醇,室內空氣,焦?fàn)t煤氣,煉廠氣,天然氣,變壓器油,多氯聯苯,植物油,增塑劑,塑化劑
5?填充柱 電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法的詳細介紹
電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法
電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法 詳細信息:
名稱:填充柱
固定相:分子篩
規格:1.5--3m*4mm(內徑)
型號:5?
應用:SJ 2805-1987電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法






high quality
Every column is rigorously tested
Full range of chromatographic columns
Reliable technical support
Years of accumulated rich experience in chromatographic analysis and technical team
quality assurance:
Use high-quality stainless steel tubing, glass tubing and chromatography packing to make a variety of high-efficiency packed chromatography columns
If you need to use stainless steel filter mesh as the plug at both ends of the column, please specify when ordering
If on-column injection is used, there will be a 6CM space at the front of the column inlet.
To prevent the outflow of chromatographic packing, both ends of the column are blocked with silanized glass wool
If the column is filled with valve injection or non-on-column injection, the column inlet is filled
Various glass column co nfigurations for gas chromatographs are available
The entrance of the 2mm inner diameter glass column tube is equipped with a slope to facilitate sample injection
Each column is fully co nditioned and tested for rigorous quality e valuation
Precautions
Thank you for purchasing a chromatographic column produced by Haohan.
Every chromatographic column provided by Haohan has been aged. To ensure you get the best analytical separation effect, please aged for 1-2 hours before use. When aging, the carrier gas should be passed through for a bout 10 minutes. After the air in the column is completely replaced, the temperature is programmed to increase to the maximum operating temperature for aging.
To avoid co ntamination of the detector, do not co nnect the column to the detector during conditioning.
When the oven temperature is higher than room temperature, a small amount of oxygen in the carrier gas will damage the statio nary phase in the chromatographic column, and the carrier gas must be further deoxygenated by a deoxygenation tube (it is recommended that the oxygen co ntent of the carrier gas used should not exceed 1PPm)
When installing a chromatographic column, the product number should face the operator, and the left side is the injection port of the chromatographic column (or see the logo).
When disassembling the column, bring the column temperature down to room temperature before turning off the carrier gas.
電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法 詳細信息:
名稱:填充柱
固定相:分子篩
規格:1.5--3m*4mm(內徑)
型號:5?
應用:SJ 2805-1987電子級氫中痕量氧+氬、氮測定方法 變溫濃縮色譜法






high quality
Every column is rigorously tested
Full range of chromatographic columns
Reliable technical support
Years of accumulated rich experience in chromatographic analysis and technical team
quality assurance:
Use high-quality stainless steel tubing, glass tubing and chromatography packing to make a variety of high-efficiency packed chromatography columns
If you need to use stainless steel filter mesh as the plug at both ends of the column, please specify when ordering
If on-column injection is used, there will be a 6CM space at the front of the column inlet.
To prevent the outflow of chromatographic packing, both ends of the column are blocked with silanized glass wool
If the column is filled with valve injection or non-on-column injection, the column inlet is filled
Various glass column co
The entrance of the 2mm inner diameter glass column tube is equipped with a slope to facilitate sample injection
Each column is fully co
Precautions
Thank you for purchasing a chromatographic column produced by Haohan.
Every chromatographic column provided by Haohan has been aged. To ensure you get the best analytical separation effect, please aged for 1-2 hours before use. When aging, the carrier gas should be passed through for a
To avoid co
When the oven temperature is higher than room temperature, a small amount of oxygen in the carrier gas will damage the statio
When installing a chromatographic column, the product number should face the operator, and the left side is the injection port of the chromatographic column (or see the logo).
When disassembling the column, bring the column temperature down to room temperature before turning off the carrier gas.
相關產品
在線留言 |