聚乙二醇毛細管柱 固定污染源廢氣 苯系物的測定
如果你感興趣的話，可以電話：0632-5667636 
產品名稱：聚乙二醇毛細管柱 固定污染源廢氣 苯系物的測定
產品型號：聚乙二醇毛細管柱
產品廠商：浩瀚色譜（山東）應用技術開發有限公司
簡單介紹
固定污染源廢氣 苯系物的測定 ，液化石油氣，二甲醚，甲縮醛，乙縮醛，乙醇，室內空氣，焦?fàn)t煤氣，煉廠氣，天然氣，變壓器油，多氯聯苯，植物油，6號溶劑殘留，裂解進樣器，消毒劑
聚乙二醇毛細管柱 固定污染源廢氣 苯系物的測定的詳細介紹
固定污染源廢氣 苯系物的測定
固定污染源廢氣 苯系物的測定 詳細信息：
固定污染源廢氣 苯系物的測定 詳細信息：
名稱：毛細管柱
規格：30m*530um
型號：聚乙二醇PEG-20M
應用：固定污染源廢氣 苯系物的測定 氣袋采樣/直接進樣-氣相色譜法
固定污染源廢氣 苯系物的測定 氣袋采樣/直接進樣-氣相色譜法（征求意見稿）
本標準規定了測定固定污染源廢氣中苯系物的氣袋采樣/直接進樣-氣相色譜法。
本標準適用于固定污染源廢氣中的苯、甲苯、乙苯、鄰二甲苯、間二甲苯、對二甲苯、異丙苯和苯乙烯的測定。
當進樣體積為1.0ml時，苯、甲苯、乙苯、鄰二甲苯、間二甲苯、對二甲苯、異丙苯和苯乙烯方法檢出限為0.2~0.6mg/m3，測定下限為0.4~2.4mg/m3，詳見附錄A。
Statio
Statio
Name: Capillary Column
Specification: 30m*530um
Model: Polyethylene glycol PEG-20M
Application: fixed pollution source waste gas determination of benzene series air bag sampling/direct injection-gas chromatography
Statio
This standard specifies the air bag sampling/direct injection-gas chromatography method for the determination of benzene series in waste gas from statio
This standard is applicable to the determination of benzene, toluene, ethylbenzene, o-xylene, m-xylene, p-xylene, cumene and styrene in waste gas from statio
When the injection volume is 1.0ml, the detection limit of benzene, toluene, ethylbenzene, o-xylene, m-xylene, p-xylene, cumene and styrene is 0.2~0.6mg/m3, and the lower limit of determination is 0.4 ~2.4mg/m3, see Appendix A for details.
Statio
Name: Capillary Column
Specification: 30m*530um
Model: Polyethylene glycol PEG-20M
Application: fixed pollution source waste gas determination of benzene series air bag sampling/direct injection-gas chromatography
Statio
This standard specifies the air bag sampling/direct injection-gas chromatography method for the determination of benzene series in waste gas from statio
This standard is applicable to the determination of benzene, toluene, ethylbenzene, o-xylene, m-xylene, p-xylene, cumene and styrene in waste gas from statio
When the injection volume is 1.0ml, the detection limit of benzene, toluene, ethylbenzene, o-xylene, m-xylene, p-xylene, cumene and styrene is 0.2~0.6mg/m3, and the lower limit of determination is 0.4 ~2.4mg/m3, see Appendix A for details.
相關產品
在線留言 |
