硅膠柱測焊接混合氣體二氧化碳/氬，液化石油氣，二甲醚，甲酸，甲醇，甲醛，變壓器油，芝麻香白酒，3-甲硫基丙醇，環氧乙烷，醫療器械，變壓器油，三甲胺，非甲烷總烴，環境空氣，固定污染源

硅膠柱測焊接混合氣體二氧化碳/氬
硅膠柱測焊接混合氣體二氧化碳/氬 詳細信息：

對某金屬結構廠車間CO2氣體保護焊工作環境安裝了離子荷電局部?jī)艋b置后的作業環境進行了粉塵、毒物等測定,現報告如下. 1 內容與方法 CO2氣體保護焊焊接時,用80%氬氣、20%CO2混合氣體,在規定電壓下使焊絲熔化進行焊接.主要危害因素為粉塵、毒物(錳、鐵等)、電弧等. 粉塵測定采用濾膜計重法;游離二氧化硅含量采用焦磷酸法;錳及其化合物測定用高碘酸鉀比色法;一氧化碳測定用一氧化碳測定儀;氮氧化物采用鹽酸萘乙二胺比色法.
應用：HGT4984-2016焊接用混合氣體二氧化碳-氧氬，HGT3728-2004焊接用混合氣體氬-二氧化碳

填充柱1：

固定相：硅膠

粒度：0.18mm-0。25mm

規格：2m*3mm

型號：HH-Silica gel

應用：二氧化碳的測定

填充柱2：

固定相：分子篩

粒度：0.18mm-0。25mm

規格：2m*3mm

型號：MS5a/MS13X

應用：氧含量的測定

硅膠柱測焊接混合氣體二氧化碳/氬 測試譜圖：



Silica gel column welding mixed gas carbon dioxide / argon
Silica gel column welding mixed gas carbon dioxide / argon Details:

The dust and toxic substances were measured in the working environment after the ion-charged partial purification device was installed in the CO2 gas shielded welding working environment of a metal structure factory. The report is as follows. 1 Contents and methods 80% of CO2 gas shielded welding Argon gas, 20% CO2 mixed gas, the welding wire is melted and welded under the specified voltage. The main hazard factors are dust, poison (manganese, iron, etc.), arc, etc. The dust is measured by the filter weight method; the free silica content The pyrophosphoric acid method is used; the potassium periodate colorimetric method is used for the determination of manganese and its compounds; the carbon monoxide meter is used for the determination of carbon monoxide; the naphthylamine diamine colorimetric method is used for the nitrogen oxides.
Application: HGT4984-2016 welding mixed gas carbon dioxide-oxygen argon, HGT3728-2004 welding mixed gas argon-carbon dioxide


Packed column 1:

Stationary phase: silica gel

Particle size: 0.18mm-0. 25mm

Specification: 2m*3mm

Model: HH-Silica gel

Application: Determination of carbon dioxide



Packed column 2:



Stationary phase: molecular sieve

Particle size: 0.18mm-0. 25mm

Specification: 2m*3mm

Model: MS5a/MS13X

Application: Determination of oxygen content

Silicone column test welding mixed gas carbon dioxide / argon test spectrum: